Forehand Vs Backhand MIG Welding Techniques

Forehand and backhand welding are the most basic of all welding techniques. They are simple, have their purpose and provide a specific type of weld when used properly. In this article you will learn why these techniques are used and most importantly why.

Forehand Technique

Forehand is a technique where the welder pushes the puddle and keeps the arc slightly ahead of the puddle. Forehand welding is done with the MIG gun pointed in the direction of travel. For example, if the welder will be welding from right to left, then the MIG gun will point toward the left at all times. The angle that the MIG gun is pointed toward the direction travel can vary. The angle of the MIG gun can be anywhere between 5 degrees to as much as 35 degrees toward the direction of travel. When traveling forehand the welder must focus on keeping the arc slightly ahead of the puddle.

Backhand Technique

The backhand technique is the exact opposite of the forehand welding technique. In the case of back hand welding the welder keeps the MIG gun pointed toward the weld while traveling away from it. For example if the welder is welding from left to right then the MIG gun will be pointed toward the left. The angle of the MIG gun can vary between 5 degrees to 35 degrees toward the weld.

Understand the Reasons for these Welding Techniques

These MIG welding techniques do serve a very important purpose. What they do is control the weld shape and the penetration pattern.

Forehand welding is the most commonly used technique for MIG welding. What the forehand method does is produce a shallow but wide penetrating weld that is flat in appearance. This is the type of weld and penetration is used for most weld joints where overheating is not an issue.

Backhand welding is the least used welding technique when it comes to MIG. This technique produces the deep and narrow type of penetration that is best suited for thinner metals. The advantage of backhand welding is that the arc is focused onto the filler metal and that means extra material to prevent burn through. When welding thinner metals you always run the risk of burning a hole through the weld joint. With the backhand method the extra filler metal at the arc helps prevent this and at the same time can keep warp age to a minimum.

Posted in general | Tagged , , | Comments Off on Forehand Vs Backhand MIG Welding Techniques

What Makes London a Lively and Appealing City for Travelers?

It is petrifying to move to a new town especially when you do not know anyone. However, there is a different story to London because it is always busting with travelers and this makes it easy for those visiting to feel at home quickly.

London has a traveller's community that enterprises of individuals from New Zealand, Australia and South Africa. There is also special consideration for Europeans, Canadians and Australians citizens who wish to travel to London.

Most people come to London for fun or work. It is easy to get to London. You can apply through the British Embassy through several Visas. Most individuals who travel to London on a two year working holiday visa end up staying for the full two years. That way, they get a chance to know people, create relationships and have lasting memories.

Although London is busy, it is rich with all the remarkable sceneries that you could hope for. There are amazing places to visit. Any activity you want is available and you can enjoy art, education and sports, just to mention a few. Each and every day of your stay can be filled with so much entertainment.

If you treasure some quiet time, you can go to the local pubs for a drink or to watch football. The activities do not needarily have to be costly. There will always be something to keep you entertained.

In addition, London is easy to adjust to. It is a large city with a huge number of people. Despite this, it is a quiet and pleasant place. You get to enjoy the scenery and the outdoor experience more.

London has magnificent buildings. The buildings are unique and have fine architecture. The grandeur is pleasing enough to those in creative design and adds to their artistry. It is simply an inspiring town.

It is also amazing that you get to go to the museum for free. London has beautiful museums. They are also public and allow everyone to appreciate history and culture. Additionally, they hold art that has inserted for centers and do not restrict visitors.

Traveling to London is there before an experience worth taking. Another one of its appealing, notable and relaxing features are its green areas. The city is well planned and includes parks such as the hike parks and wild parks. As much as this may come as a surprise, there are also wild animals within some of these parks. The variety of parks is breath-taking. In addition, they are very accessible and are located at the heart of London.

This city is convenient and it is easy to get housing that is close to important amenities. That way, you can walk to work, the grocery store, bank, social joints and many other locations. The public transport system is also convenient and even if you do not have a car, getting around is not going to be a problem. You can also use your bike around the city. They have double buses that are like a free tour of London. You are further not limited on the taxis and will find a range of affordable ones.

Travel to London to also experience the abundance of culture. It is the city that attracts diverse nationalities and people. It is a great city for studies, work or business. It provides the opportunity to interact with interesting people from around the world.

The people are friendly and it is easier to form bonding relationships. The people are also more fun and outgoing.

What is a city without a cuisine? London is not left behind when it comes to amazing dishes. You will find a variety of quality meals. The food is fresh and delicious. Furthermore, you will easily find organic food in the stores.

London easily connects you to other towns and countries in Europe. It is convenient to travel. Moreover, regulation allows all workers to have at least 20 days of leave. It is made much more convenient with affordable flights.

Communication will not be an issue because internet and phone services are affordable. The plan is not only cheaper in London but also in other parts of Europe and America while roaming.

After all the good is spelt out, there is a compromise to make. London is an expensive town. So many people are moving to London and this is making it expensive in terms of rent and other amenities. Demand is increasing day by day.

All in all, London feels more like home and is a great place to tip travel to. It further makes you more of who you are and is an inclusive city.

Posted in general | Tagged , , | Comments Off on What Makes London a Lively and Appealing City for Travelers?

5 Fundamental Principles of Insurance

Insurance is a contract, a risk transfer mechanism whereby a company (Underwriter) promised to compensate or indemnify another party (Policyholder) upon the payment of reasonable premium to the insurance company to cover the subject-matter of insurance. If you are well conversant with these principles, you will be in a better position in negotiating you insurance needs.

1. Insurable interest. This is the financial or monetary interest that the owner or possessor of property has in the subject-matter of insurance. The mere fact that it might be detrimental to him should a loss occurred because of his financial stake in that assets gives him the ability to insure the property. Castellin Vs Preston 1886.

2. Umberima fadei. It means utmost good faith, this principle stated that the parties to insurance contract must disclose accurately and fully all the facts material to the risk being proposed. That is to say that the insured must make known to the insurer all facts regarding the risk to be insured (Looker Vs Law Union and Rock 1928). Likewise, the underwriter must highlight and explain the terms, conditions and exceptions of the insurance policy. And the policy must be void of ‘small prints’.

3. Indemnity. It stated that following a loss, the insurer should ensure that they placed the insured in the exact financial position he enjoyed prior to the loss (Leppard Vs Excess 1930).

4. Contribution. In a situation where two or more insurers is covering a particular risk, if a loss occurred, the insurers must contribute towards the settlement of the claim in accordance with their rateable proportion.

5. Subrogation. It has often been said that contribution and subrogation are corollary of indemnity, which means that these two principles operates so that indemnity does not fail. Subrogation operates mainly on motor insurance. When an accident occurred involving two or more vehicles, there must be tortfeasor(s) who is responsible for accident. On this basis, the insurer covering the policyholder who was not at fault can recover their outlay from the underwriter of the policyholder who is responsible for the incidence.

Posted in general | Tagged , , | Comments Off on 5 Fundamental Principles of Insurance

Cancun Weather – Best and Worst Months to Go

Cancun weather is one reason why this Mexican resort enclave is the second most popular vacation destination in the Caribbean region.

Other reasons why Cancun draws so many tourists include its hotel, shopping and restaurant strip; the inexpensive bus transportation system; plenty of things to do; and convenient access to and from U.S. airports. It is 1.5 hours flight time from Miami and four hours from Chicago.

The best time to go to Cancun depends in part on whether you prefer to spend a lot of time on the beach and in the water, or if you like to spend most of your time shopping, dining and visiting the various attractions in the region. Some fabulous Mayan ruins are located nearby.

Cancun weather is generally warm throughout the year — in fact many hotels and resorts have open air lobbies — but offshore breezes can make the air and water more chilly in winter months.

Average Temperatures

The average year-round high temperature for this resort destination is nearly 88 degrees Fahrenheit and the average low temperature is just less than 74 degrees, according to the World Meteorological Organization.

Cancun weather in May through September is the warmest time to visit when the average high temperature exceeds 90 degrees each month — peaking at 92.5 in August.

Cancun weather in December, January and February is coolest when the average high temperatures are about 83 degrees.

The average low drops below 70 degrees in January and February, and barely breaks 70 in December.

Average Rainfall

The average rainfall is 4.4 inches per month and the average number of rain days per month is 9.6.

The rainfall and rain days are about average for a Caribbean destination.

February, March and April are the driest months when it rains less than 1.8 inches a month. It also rains only five days a month during that time.

Total rainfall increases in June, drops in July and climbs during the most active hurricane season months of September and October, when it rains nearly nine inches per month.

November also has a higher than average amount of rain.

Best Times to Go

Vacationers will find that the best time to go to Cancun is February through May, while they should avoid it in September and especially in October.

However, be aware that water temperatures in February and March are chilly and not comfortable for swimming for any great length of time.

Posted in general | Tagged , , | Comments Off on Cancun Weather – Best and Worst Months to Go

BCIN? Difference Between Designer, Architect and Engineer According to the Ontario Building Code

As I meet with new clients and friends every day, I commonly hear the same questions “What is a BCIN?” “When is a BCIN required?” etc. Here is some clarification to the public on some important issues about choosing a company to provide you with plans. Please note that this information applies only in the Province of Ontario.

What is a BCIN?

A BCIN stands for ‘Building Code Identification Number’. This number is assigned by the Ministry of Municipal Affairs & Housing, to successful applicants who have completed the requirements outlined in Division C Section 3.2 of the Ontario Building Code. There are two distinct types of BCIN number, individuals & firms. Individuals are people who have completed the exams and have received a BCIN from the MAH; however, they do NOT carry any insurance. As a result this limits the types of projects that the person can do. Firm BCIN’s on the other hand MUST carry valid liability insurance, and depending on the amount of designs fees that a firm charges in a year will dictate the required amount of insurance coverage they must have. Insurance is expensive but it is there to protect you so avoid working with companies who do not have it. For most people, a home is your single largest asset; do you really want to get plans from someone without insurance?

How do I know if I am choosing a registered company?

The Ministry of Municipal Affairs & Housing maintains a database of all registered BCIN holders. The registry is available through a system called QUARTS. Once on the Public Registry, this system allows you to search by the individual’s name, the company’s name or the BCIN #. Once you have found a business or individual, it will bring you to a page with details on the company. It lists the mailing address of the business & contact details. At the bottom it should also show the Registration as ‘Registered Designer’ and the Status as ‘Current’. If it shows up as ‘lapsed or expired’ then this means that they either do not have valid insurance for that year, or that they are late in filing their paperwork.

Do I need an architect or engineer for my project?

Probably not! There have been massive changes to the system in the last few years, opening the doorway for a new title; designers. Architects & Engineers are NOT required for any project less than 600m² (6,458 sq.ft.) and less than 4 storeys. For most residential and small commercial projects, you do NOT need an architect or an engineer. However, and this is important, if the project involves severe structural modifications, an engineer may be requested by the municipality to review the plans. On this note, there is a BCIN exam which will supersede this requirement! If your design company is a registered company in the Category of ‘Building Structural’ then they can complete the plans.

When do I need a BCIN ‘stamp’ for my project?

Depending on the type of project you may or may not need a BCIN number on your drawings. You do not need a BCIN number if the project relates to the construction of a house that is owned by the person who produces the drawings or if it relates to a farm building less than 3 storeys. There are a few other instances, but these are probably the two most important. Often I hear homeowners ask for just the drawings to submit for permit (no stamp). This is allowed, but as the homeowner you must be knowledgeable of the drawings (after all, you are claiming that you have produced them). It is okay to admit to the municipality that you hired someone to draw them for you, but at the end of the day you will be responsible to ensure that the drawings meet code. If the city has approved your building permit based on the drawings and you proceed to build your project to the drawings only to later find out that there is a problem, you will be on the hook to make any necessary adjustments to pass inspection. Most companies will charge from $200 to $2000 for the use of their BCIN number on the drawings. This may seem expensive but it is the security blanket that will keep you safe and ensure that your drawings meet code! I also personally apply for the permits and handle all the paperwork on my client’s behalf when I charge this fee; which most people prefer as nobody likes to stand in line for half a day to submit paperwork to the City.

I hope that this will help to clarify any questions you may have had regarding the requirements of having someone produce building permits for your project. I look forward to working with you, and if you have any questions then please don’t hesitate to ask!

Posted in general | Tagged , , | Comments Off on BCIN? Difference Between Designer, Architect and Engineer According to the Ontario Building Code

Construction Site Management – Accessibility

Construction sites offer different challenges as far as accessibility is concerned. This follows the fact that there is a mass movement of men (labor) as well as material haulers. These range from pick up trucks to trailers. Depending on the items being moved, the weight is different and as such the capacity of the route to and from site should match these requirements. There will also be visitors in light personal vehicles, especially consultants and prospective property buyers in case of commercial projects or prospective tenants in case of residential or other rental spaces. The available or provided access should well cater for these requirements as far as is possible. The different site conditions include;

· Virgin sites: This reflects to a new site where no other construction activity has been done before. This means that there is no access to the specific point of construction. Where such route may be available, it may not be sufficient and may need improvement. This may include works like cutting down trees, cutting high sections and filling low ones, dumping murram or other appropriate material. It will also include compact, wetting and curing of the dumped material. Being a new and sometimes temporary route, it will need maintenance. Where such access is to pass through other people's property, appropriate permissions should be thought. The local authorities must also be informed and provided with plans like ways of averting problems like ecological disturbance. It is usually wise to have the access route for construction being also the permanent access to the permanent route for accessing the completed facility.

· Existing sites: These are sites that have already been built upon previously. They may have existing access. The only hurdle would be where such access is still in use by others, as it will create an inconvenience and delivery use may be regulated to low peak periods only. There could also arise the need to provide alternative routes for the existing users. A good example here is road maintenance or improvement works, wherey diversions are created and maintained in good order during the construction period. Appropriate arrangements should be made to minimize inconvenience as well as prevent accidents.

· Tight Sites: These are unique sites in the fact that they have minimal space for maneuverability. Examples here are found in town centers or institutions. Regulation here is very strict and as such stringent measures should be put in place to follow such regulations. These sites are very difficult to manage as far as accessibility is concerned. An example is where concrete is to be delivered on site already mixed (In premix trucks). This presents the headache of timing as well as preventing inconvenience to other users.

The provision of access to sites should be a well thought out activity. Maintenance should be in top priority. The design of such access roads should also cater for the traffic envisaged for the said project. Road signage and other such furniture should also be provided and well maintained.

Posted in general | Tagged , , | Comments Off on Construction Site Management – Accessibility

Garage Insurance – Used Car Dealers and Repair Shops Watch Those Symbols

Garage insurance is a much misunderstood policy form. Many professional insurance agents are confused about exactly when to use it and more importantly exactly how. You can use a garage liability policy to protect a used car dealer, often referred to as dealer's insurance, or you can use this same form to protect an automated repair shop or to set up body shop insurance. The trick is to know the symbols. If you own a car dealership or an automotive repair shop and are purchasing insurance for your business, it is advisable that you find an agent who specializes in the garage insurance form to help you with this purchase so you do not end up with the wrong Form and possibly find yourself without coverage after a large loss.

As I mentioned earlier, both types of businesses, auto repair and or body shops and used car dealers both need the garage policy. But exactly what kind of operations are covered in these policies is driven by the symbols shown on the policy. This is very important. If your business is automated repair or body work but your policy is set up with symbols that would apply to a car dealership, you could find yourself without coverage in the event of a liability loss.

So how do you know if you have the correct symbols and then the correct form? Pull out your garage policy and look at the first page. Beside each type of coverage, usually to the left, there will be a least one two digit number between 21 and 31. These symbols will describe what is protected by the coverage shown next to that symbol. Here is a list of the most common symbols and what each one protects:

Symbol 21 Any auto
Symbol 22 All owned autos
Symbol 23 Owned private passenger autos only
Symbol 24 Owned autos other than private passenger
Symbol 25 Owned autos subject to no fault laws
Symbol 26 Owned autos subject to Uninsured Motorists law
Symbol 27 Specifically described autos
Symbol 28 Hired autos only
Symbol 29 Non-Owned autos used in the Garage Business
Symbol 30 Autos Left for Service / Repair / Storage
Symbol 31 Autos on Consignment

As you have probably figured out, if you are an automobile dealer and you have symbol 30 on your policy, you would find yourself without coverage. So why not just put symbol 21 on all coverage? Well, since code 21 is the broadest coverage, you would have to pay for this insurance policy and in some cases you might be purchasing insurance protection that you did not really need.

Take some time to look at your policy carefully and review the symbols for each line of coverage to make sure that they are appropriate for the work you do. If you need help with this process, consult your agent. If you agent does not specialize in businesses needing garage policy, ie dealers insurance and auto repair shop insurance, then find one who does. This protection is just too important to leave up to an agent who is practicing on the job learning on your policies.

Posted in general | Tagged , , | Comments Off on Garage Insurance – Used Car Dealers and Repair Shops Watch Those Symbols

Travelling As a Hobby

A hobby, whatever it may be is definitely a fun activity and a stress buster. There are so many activities people do in their free time and to relax their stressed mind. The common and popular hobbies are Stamp and coin collection, music, painting, photography, reading and cooking. Among long, long list of various hobby activities, there is one interesting, informative and adventurous hobby which is also one of the most popular and loved pastimes. That is travelling.

For some it is a waste of time and money. They argue to use an alternative and read a book or watch a film related to places to be travelled. For others, there is no doubt that a person gets more life experience by walking a mile than reading an entire book. It’s a feeling of freedom, Freedom from routine and a great experience each time. You can make new friends, get rid of day to day frustrations, and give yourself some time to experience something new.

People who like and enjoy travelling have different options to try every time; a crowded market, historical momentum, a lonesome beach, and high hills and many more. The world is so big and there are so many places to visit. Each has a different beauty, various creatures, culture, speciality, language, history, and weather. The hobby of travelling is a hobby of enduring the beauty of God’s creativity and skill fullness.

If you are travelling to an historic place then chose to get prior information and an authorized guide. If you are going to any adventurous place then prefer to go in a group or with trained a person with emergency box ready with you. If travelling to a new country then make sure of having details and include a list of hotels, food, culture, language, laws, travel options, emergency numbers, currency of that region and other many more minute details. If as a traveller you like to have a nice and a planned trip without any hurdles then you are better off planning your trip.

You can take the details about the place to be visited. A wisely chosen spot, or a package will help you reduce your expense, as travelling is an expensive hobby. The planned trip is very helpful for the lone woman travellers. If you are from those who love adventures then the sky is your limit, although, you have to be smart, and informative enough to handle the experience waiting next step. You can enjoy hill walking, hiking, canoeing, caving, water sports, snow sports, and many more adventures activities.

Travelling gives you a great break from your routine and an opportunity to learn a new culture, old history and make lifelong friends. The people you come across and interact with, will give you a new heritage. They may open up your mind from a particular bend of thinking. Travelling is a perfect educational hobby as it helps you learn a lot of new things in life.

Posted in general | Tagged , , | Comments Off on Travelling As a Hobby

Your Homeowners Insurance May Not Cover Woodpecker Damage

Meet Amy, City Girl that became a small town resident upon her marriage to George. The stark difference between living in the very center of urbanized civilization and township dwelling was somewhat of an adjustment for Amy. Sure she loved the sights and sounds of nature exposed: the lake, the trees, grass, flowers and the vibrant color of winged birds. Nonetheless, how she missed the hustle and bustle and – yes – even the noise of what she had always recognized as the center of commercial shopping, auto and bus traffic – honking included – and life as she had been bred to appreciate!

Though noise has always been the core of her existence, the incessant pecking on the side of her roof in small town America where she currently had set up residence did absolutely no good for her nerves. Five o’clock in the morning, you see was far too early for a woman of the world such as she to be rudely awoken from her slumbering state. And the fact that the pecking was coming from a fine feathered ‘friend’ known most commonly as the woodpecker did little to placate her uneasiness.

Then came the crunch that really threw Amy off. It appeared as the bothersome woodpecker had begun to incur damage on her lovely home! But nothing could appease Amy when she discovered that her standard homeowners insurance policy did not even cover the damages and losses she now suffered!

“You see, Ma’am,” explained the nice insurance agent, “insurance companies simply do not cover general home liability that has been wrought through negligence. In fact, they view woodpecker damage as something that could have been avoided through proper home maintenance.”

If only Amy had known! She most certainly would have confronted the little peril with a vengeance. Now it appeared that it was too late and she and her husband would have to bear the losses through out of the pocket expenditures.

They say life is a great teacher. Amy knows better than most.

“Learn from me,” says Amy, former city dweller. “Don’t let pests get the better of you or your home risks will!”

How does one tackle a woodpecker problem? There are a number of hands-on methods:

• Go out and purchase a tool that’s on the market in regard to woodpecker deterrence.

• Surround outside home spots that connect to the roof with wired fencing.

• Attach colorful tape below roof and around the roof’s gutters.

• Seal attic holes and house siding with caulk or other materials.

• Hire a pest eliminating firm to take care of the problem.

• Explore your own creative to tackle the nasty wood-pecking problem.

Ask Amy. She’ll tell you forearmed is indeed forewarned: speak to an independent insurance agent about your homeowners insurance policy to make sure it is tailored to your needs.

Posted in general | Tagged , , | Comments Off on Your Homeowners Insurance May Not Cover Woodpecker Damage

Construction Insurance – Importance and Coverage

Construction involves large number of manpower and huge investments of money. The workers at a construction site risk their lives working at great heights, with dangerous tools, toxic materials, heavy equipment, under tunnels, etc. Hence, construction is associated with high amount of risk for money and lives. A slight negligence or bad fortune on part of the worker or owner may prove too costly. It may lead to a huge financial loss. These unfortunate events require tools, which can bail the company out of the situation. Here arises the need of ‘Construction Insurance’, the risk management tool, customised specifically for the construction industry. Construction insurance is like any other insurance, which is used to protect the various parties associated with construction process.

A comprehensive construction insurance policy covers all the expenses that may occur due to property damage or personal injuries at the construction site. This insurance not only includes the organization owner, but also workers, employees, tenants, sub-contractors, sole proprietors and business partners.

Importance of construction insurance

As discussed above, construction involves usage of heavy equipment, materials, labour, etc. and is more prone to accidents. Since the business stands liable for any accident on the construction site, it is the business owner or the contractor that should pay for the medical treatment charges of the injured or compensation to the families, in case of death of the worker.

Material costs associated with construction are very high. Any damage to the structure or the materials leads to huge financial loss. Insured with the construction insurance, one can seek financial assistance from the insurance company.

The buyers of the flats or the constructed property will have all rights to sue the construction company, in case of faulty construction. In such cases the construction company has to pay for the remodelling or repairing the constructed site. Construction insurance protects the builders from those claims, by providing financial assistance.

Apart from the above circumstances, construction insurance provides wide coverage, providing security to the business in case of unpredicted events.

Four main areas it covers

Construction insurance is very significant in terms of its coverage. It is very comprehensive and is specifically designed to cover every aspect of construction process, to make the business process flexible. Construction insurance covers four major areas of business insurance. They are:

Public liability insurance

Public liability insurance is a general insurance to be possessed by any business which involves interaction with the customers or people in general. Public liability insurance as part of construction insurance helps the businesses in case any damage to third party property or individuals is caused by employees or the tools used in construction.

Employers liability insurance

As the construction industry involves lot of risks, any worker can get injured or die at any point of time, due to the faulty equipment or negligence of supervisors or co-workers. Employers are responsible for the health and safety of their employees at construction site. Moreover, the employees will have every right to sue the owner and claim for compensation. In case of such unexpected events, the employer or the owner can benefit from the construction liability insurance, as the insurance company pays the medical costs or the compensation associated with the claims.

Contractors all risks insurance

Contractors all risks insurance is customised for construction businesses. It provides assistance for contract works of new houses, theft of materials or tools, damage to the materials or tools due to unexpected events, sudden stoppage of on-going works of new houses, owned or hired plants, etc. This insurance acts as a perfect help for the most commonly incurred accidents in the construction process.

Personal accident insurance

This insurance is specifically designed for managers, sole proprietors or business partners. This is useful in the cases, where the person injured can’t blame any other person for the injury caused to him. This is helpful in providing assistance during the period for which the injured person cannot get income.

Construction insurance is very important for construction businesses as the damage or the financial loss occurred is very hard to be recovered. Businesses should realise that the cost of premiums for insurance is less when compared to the compensation costs. Therefore, it can be concluded that, construction insurance is very valuable in making the business sustain for long run.

Posted in general | Tagged , , | Comments Off on Construction Insurance – Importance and Coverage